Make sure your Subaru, Nissan, Honda, or Toyota is outfitted with a top notch exhaust system from Racing Exhaust System. Some are ideal for normal vehicles while others are better for high-performance engines. Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967.

We use the latest, advanced equipment to ensure precise and accurate adjustments. Each of the trucks will be included in Shelby's official registry. Revology's '68 Shelby GT500KR surpasses the performance of the original with a 710hp supercharged Ford/Roush Performance 5.0L Ti-VCT Coyote DOHC V8 engine. In 1962 Carroll Shelby, one of America's greatest race car drivers began a new chapter in his storied career with the legendary Cobra sports car. A piece of of this sports car's "DNA" is part of every subsequent Shelby vehicle.

An upstream air injection point, ahead of the catalytic converter, is also sometimes present to provide additional oxygen only during the engine warm up period. This causes unburned fuel to ignite in the exhaust tract, thereby preventing it reaching the catalytic converter at all. This technique reduces the engine runtime needed for the catalytic converter to reach its "light-off" or operating temperature. Many vehicles have a close-coupled catalytic converter located near the engine's exhaust manifold. The converter heats up quickly, due to its exposure to the very hot exhaust gases, enabling it to reduce undesirable emissions during the engine warm-up period.

Installation was easy, and the craftsmanship and welds are very high quality. Mishimoto exhausts are constructed of large diameter mandrel-bent pipes for maximum flow. Mishimoto exhausts are perfectly engineered to provide an aggressively rich tone with no annoying highway drone. In general, though, you can expect to pay anywhere from $1000 upwards for a good cat back exhaust system. That may seem like a lot of money, but keep in mind that a cat back exhaust can provide a significant boost to your car's performance and help it to stand out from the crowd. Typically a cat-back exhaust upgrade can be swapped with the original exhaust without any modifications.

Although phosphorus is no longer used in gasoline, it (and zinc, another low-level catalyst contaminant) was widely used in engine oil antiwear additives such as zinc dithiophosphate (ZDDP). Beginning in 2004, a limit of phosphorus concentration in engine oils was adopted in the API SM and ILSAC GF-4 specifications. Although catalytic converters are most commonly applied to exhaust systems in automobiles, they are also used on electrical generators, forklifts, mining equipment, trucks, buses, locomotives, motorcycles, and on ships. They are even used on some wood stoves to control emissions.[5] This is usually in response to government regulation, either through environmental regulation or through health and safety regulations. Custom setups, especially for vehicles that do a lot of off-roading are also available.

Your Charger will definitely grab people’s attention each time you accelerate. However, to feel the benefits of this upgrade, you need to install a Dodge Charger cat back exhaust kit that fits your vehicle’s specifications. Thankfully, AmericanMuscle carries a variety of cat back exhaust systems that match your Dodge Charger’s configuration and your driving lifestyle. We’re also dedicated to providing the best products in the market, so all of the items we have are made by trusted automotive brands.

Different exhaust systems offer different noise levels and tones, but how? Sound quality and overall loudness of an exhaust system can vary significantly depending on the pipe diameter, size and design of the muffler, resonator inclusion, and the number of outlets. For this reason, all systems sold on RealTruck are filtered by noise level, including loud, moderate, and quiet. From the factory, most manufacturers employ small-diameter piping, restrictive mufflers, and noise-reducing resonators, significantly smothering exhaust flow and sound quality. A front pipe back system replaces a few key components of the OEM Honda or Acura exhaust found on your EX, Touring, Si, or A-Spec that are after the Front Pipe (the pipe that goes under the engine).

In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. The design of these systems often sees an increase in horsepower compared to the factory design of a vehicle. Because stock models try to minimise materials and maximise space, with horsepower as a lower priority.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

A cat back exhaust system is one of the most popular aftermarket upgrades for performance-minded drivers. When deciding which type of exhaust system to choose, it is important to consider your needs and budget. If you are looking for maximum power and efficiency, a cat back exhaust may be the best option. However, if you are more concerned with cost and weight, a standard system may be a better choice. A cat back exhaust is one of the most popular upgrades for car enthusiasts.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

However, it’s always a good idea to consult with professional mechanics like the crew at Bradley’s Auto Service to make sure everything checks out. As a vital touch point to the driving experience there is something truly special about dropping a gear and hearing the roar as you disappear. We fear most the time when we are enveloped in silence in our electric bubbles. Our mission forever more is to push off that date and engineer, design, and manufacture the world’s greatest exhaust systems, so that you will always be able to enjoy your car to the fullest.

Aftermarket custom cat back exhaust systems increase the efficiency of an exhaust system because of the mandrel-bent turns and reduction in back pressure. They are the popular choice when it comes to aftermarket exhaust systems as they offer reliable performance and sound without having to buy a new catalytic converter. They are also well-suited to those who like to handle their own installation!

You can also add other upgrades to give your Charger an extra performance boost. Visit the AmericanMuscle headers and exhaust accessories pages to find parts that fit your new cat back system. Mishimoto offers a wide selection of exhaust systems, including cat-back exhausts, performance exhaust systems, and aftermarket exhaust options, designed to enhance your vehicle's performance, sound, and style. Our exhaust systems are engineered with precision and constructed using high-quality materials to deliver improved exhaust flow, increased horsepower, and an enhanced driving experience. Enhance the sound and performance of your Subaru with our premium cat back exhaust systems. Designed to replace the factory exhaust system from the catalytic converter rearward, these cat back exhausts offer a deeper, more aggressive exhaust note while reducing restriction for improved airflow.

Considering cat-back exhausts replace more restrictions, they typically offer increased performance and noise compared to axle-back systems; however, they’re also more complicated to install…and more expensive. Every gear head is always looking to upgrade their car’s performance, sound, and look. One quick solution to all three of these aspects is a cat back exhaust system. A cat back exhaust is an exhaust system modification that increases airflow and look. "Cat back" refers to the parts of the exhaust system behind the catalytic converter (where the "cat" in the name comes from).

It's more than our precision-fit or full engine-to-tailpipe product offering, Walker sets the standards. From mild rumble to wild roar, upgrading your exhaust will improve the sound of your truck and help it to stand out from the pack. This direct-fit SPEQ Series system bolts on to your Tacoma easily thanks to the extensive use of 3D scanning during development to ensure OEM-like fitment.

There are subtle changes on the outside to let onlookers know that this is no ordinary F-150, such as a custom dual-intake hood, a custom front fascia and grille combo, and Shelby badging. For the interior, Shelby adds carbon-fiber trim, billet racing pedals, custom floor mats, and a serialized plaque. For lean-burn spark-ignition engines, an oxidation catalyst is used in the same manner as in a diesel engine. Emissions from lean burn spark ignition engines are very similar to emissions from a diesel compression ignition engine. Upon failure, a catalytic converter can be recycled into scrap.

Shelby American is pushing the latest generation Shelby GT500SE supercar to new levels. As the first Carroll Shelby Signature Edition version for this model, the car delivers sizzling styling, razor sharp handling and an additional 40 horsepower. The 2024 Shelby Super Snake is the pinnacle of our performance cars based on Ford's next generation S650 Mustang sports car. Gases are pulled from the cylinder head by the exhaust manifold, at which point they are removed via the exhaust at the rear of the vehicle.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block Corvette and Ferrari increased the power of the V12 powered GTO's, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford's incredible 6.7-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

A cat back exhaust system, also known as a catback exhaust, is an aftermarket automotive exhaust system that replaces everything in the exhaust system from the catalytic converter to the tailpipe. Cat back exhausts are available in various configurations and materials, allowing drivers to choose the one that best suits their needs and preferences. An aftermarket cat back exhaust might be the perfect upgrade that can enhance your Dodge Charger’s performance and road presence. Unlike its OEM counterpart, it boasts a less-restrictive construction, so it can release more exhaust gases. A cat back exhausts is also designed to install behind a catalytic converter, so remains emission compliant. In addition, its design lets your vehicle generate a more distinct exhaust sound.

In this article, we’ll explain what a catback exhaust system is, what it does, and why it’s different from your run-of-the-mill exhaust systems. There are seemingly endless available upgrades when looking to enhance vehicle performance. It certainly rings true when it comes to your vehicle’s exhaust system. One term that you’ve probably heard if you’re in the market for an aftermarket exhaust upgrades is cat-back exhaust. What exactly does it mean, and how does it change the way your vehicle performs? This 2009 Pontiac G8 GXP is one of approximately 1,830 examples produced, and it has 16k miles.

You also need to be careful when tightening the bolts on the cat back. Over-tightening can damage the system, so just make sure they're tight enough to hold everything in place. It's important to make sure that the cat back is properly aligned with the exhaust pipe. If it's not, you could end up with an inefficient or even dangerous exhaust system. Competitors often rely on generic silencers or gimmicks that claim to cut out drone without any real knowledge or development involved.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. With additional power from idle to redline, we’ve carefully tuned this bad boy to free up power without the annoying drone that often comes in V6 exhaust. Explore further with higher exhaust clearance and experience the sound of adventure.

Dual Magnaflow wide open mufflers with quad 3.5" exhaust tips, slightly louder and deeper than standard Borla. This upgrade option retains the large Borla resonator and replaces Borla mufflers with dual Magnaflow mufflers and quad tips. Borla is a great exhaust, but with this upgrade your back will look much better with the large aggressive oval quad tips and will sound better too! Cat-back exhaust systems refer to all of the components that exhaust gasses flow through after exiting the vehicle’s catalytic converter.

CORSA does not recommend or recognize purchases and installations on unspecified vehicles. ARK Performance is a leading manufacture that develops the best cat back exhaust systems, downpipes, test pipes, and hi-flow cats for all car enthusiasts. Using custom designed straight through mufflers for flow - without the noise level of a track car. From a company that’s as committed to your satisfaction as to sonic excellence. A catback exhaust system is a great way to improve the sound, performance, and emissions of your vehicle. If you are looking for a way to improve your vehicle, a catback exhaust system is a great option.

With over 66 years of breakthroughs and patents in high-performance gas and diesel engine development—including turbocharging and drivetrain, Banks has no rival. All Mishimoto products carry a Lifetime Warranty which includes accident protection. If you've installed any of our high quality products on your vehicle, please submit images of your ride/product to be featured on our social media accounts. Whether it’s wowing people at a show or getting every advantage over the competition on the track, our exhaust systems will help your car perform its best. They are usually the last systems to get addressed by performance drivers, who put a majority of work into turbo systems or custom tunes.

This modification includes the pipes, muffler, and sometimes the resonator. The term "cat-back" itself signifies that everything behind the vehicle’s catalytic converter is being upgraded or replaced. Milltek's Sport Catback Exhaust Systems are designed to compensate for the sound reducing qualities from the particulate filter and significantly improve the sound aesthetic of the exhaust system.

Cat-back exhaust system kits come standard with tailpipes, a performance muffler and exhaust tips. The inclusion of our wider, mandrel-bent tailpipes means cat-back exhausts are your go-to for increasing your performance gains along with boosting your sound. While horsepower and torque gains vary from vehicle to vehicle, you can expect anywhere from a percent gain in horsepower and torque after installing a cat-back exhaust system.

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

Stock exhaust systems do not give the deep and aggressive growl most motor enthusiasts desire. Let everyone hear you coming with an aftermarket cat-back exhaust on your Chevrolet Camaro. Your Chevrolet Camaro stock exhaust is pretty good, but its just not enough. No matter if you drive a Camaro V6, Camaro LT1 or Camaro SS Phastek has the best exhaust option for your ride! If you can't decide between an axle-back or a cat-back, checkout our blog to help you decide.

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

Shelby American is proud to announce the latest generation Shelby 2015 ford f250 delete kit F-150 Raptor, the most polished off-road truck ever we have offered. Add more products to wishlist by simply getting registered on Eurocarparts. One of the most important elements of your car, your exhaust is vital for preventing harmful gases from being released into your surroundings. When you notice damage or wear and tear, it's essential to fix them quickly.

Unlike your stock system, CORSA exhaust systems don't utilize performance-robbing restrictions that reduce airflow, such as chambered designs, baffles or spring-loaded valves. With wider tubing and our mandrel-bent design, your new full exhaust system will allow for reduced backpressure and provide cleaner oxygenized air to your engine. You'll see benefits like increased horsepower, torque boost and better fuel economy.

And for early access to special offers on the products you love, add Banks Special Offers. In a world of companies making disparate parts, Banks engineers the entire engine, not just its components. The proof of Banks’ expertise is its list of national championships and world records as well as the biggest military engine contract of the century. Of all the possible options, the U.S. military chose the Banks D866T engine for its high performance and durability.

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

And a lot of people think that gearheads mess with it just to make our cars sound louder. Another problem is that the gaskets and seals can degrade over time, resulting in leaks. These leaks can usually be fixed by replacing the relevant seals and gaskets.

When used in the context of aftermarket parts or performance upgrades, "cat-back" is used to indicate which section of the exhaust system the parts replace. Cat-back systems are available as both single- and dual-exhaust. All Thermal R&D exhausts are built right here in the USA out of the highest quality materials. Depending on these variables, installing a less restrictive exhaust on your Maverick can improve horsepower by about three to five percent. At Thermal R&D Performance, we have been producing and perfecting aftermarket exhausts for decades.

Because the engine won’t generate as much fumes and doesn’t need to work as hard to eliminate or minimize the fumes, your car will run better, saving you mileage. A benefit like this will improve the longevity of your car and even save you money at the gas pump. At Bradley’s Auto Service in Red Bank, NJ, we can build a completely custom exhaust system for your vehicle, including cat-backs. We will work with you to create your exhaust exactly the way you want it, with any combination of look, sound, feel, power, or muffler at your fingertips.

One main reason for choosing to remain with a stock system is because it comes already installed on your vehicle. You should know the difference between a dual exhaust and a dual exit exhaust system. But it is easy to mistake a dual exit exhaust for a dual exhaust system. The materials are often 304 stainless steel or aluminized steel. The stainless steel is usually coated in special metals that make it corrosion-resistant. This means there will be a reduction in the amount of load on the engine, leading to higher mpg and fuel efficiency.

Don’t deny yourself the perfect blend of sound and performance any longer. Give our team a call today for a cat-back exhaust system that will unleash the potential of your Maverick. I'm very pleased with this [Thermal R&D] exhaust on my Maverick. Loud enough to let the people around you know you have an exhaust but not so loud as to wake up your neighbors at 4 am. During cruising you can barely hear it inside but it wakes up when you step on it. Definitely not obnoxious but gives the truck a performance sound.

This exhaust is going to sound the deepest and give you some nice pops and bangs, while also giving you real world WHP and TQ gains. We’ve seen as much as +12 WHP when we tested our turbo-back for the 2022+ Honda Civic! For this version, we do recommend a tune and a device like a Ktuner V2 or Hondata Flashpro to take full advantage. Since the OEM catalyst is replaced with the downpipe, the Turbo-back system is sold for Race Use Only. A cat-back exhaust system replaces the stock exhaust components from the catalytic converter back to the exhaust tips.

Noticeable gains will be noticed in the initial throttle response, with reduced turbo lag. Engine movement and exhaust weight are transferred into the exhaust hangers, which puts a lot of stress on the mount brackets. IE's catback system is manufactured with multi-point and boxed-in hanger mounts designed to stand the test of time. Drive confidently knowing your exhaust is securely mounted and protected against annoying rattles or breaks. All piping is constructed of mandrel-bent T304L stainless steel to offer superior corrosion resistance.

This will improve the throttle response and acceleration in naturally-aspirated cars. The same reaction will be found in cars with forced induction with the addition of less turbo lag or supercharger response. Cat-Back exhaust systems are the most popular, coveted, and sought-after modification that enthusiasts will initially perform because of the main reason, and that is the sound. All of the brands we carry offer exhaust systems that are the result of decades of research and development.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz's reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

Everything you love about our MK7 Golf range has been re-engineered to suit MK7.5. Enjoy an unparalleled experience, power and sound output coupled with a seamless fit. Trucks are all about dependability and capability, which is why MagnaFlow engineers every one of our durable, corrosion resistant stainless-steel exhausts to last the lifetime of your vehicle. One of the things you would appreciate about the axle-back exhaust system is that it offers better sound improvement.

The DroneTrap system is wrapped up in our stamped multi-wall resonator that reinforces the housing inside and out. This high level of manufacturing protects the resonator from warping or splitting at the welds under exhaust movement. Prices stated here are only for sales within the continental United States and ordered via the ROUSHperformance.com web site. Prices for other territories and countries may vary due to shipping fees, duties, and other factors.

The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS") are distributed worldwide. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition. Discover MagnaFlow's latest evolution in performance exhaust technology. Stainless steel is the most popular choice for cat backs because it is durable and has a deep, throaty sound. But if you're looking for something lighter weight, you can also find cat backs made out of titanium. So, when it comes time to choose the right cat back for your car, keep these three things in mind and you'll be sure to find the perfect fit.

The tech commented on the high quality of the exhaust and how well it fit. With the deepest and winningest racing heritage in the business, we have credibility thatwas earned one quarter mile at a time. Our friendly staff is experienced through product testing, research and development,and track competition.

Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a truck built to perform both on and off the road. The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with... From their humble beginnings to becoming one of the most well-known companies in Brisbane and Australia we are experts in the fast developing future of new age vehicles and accessories.

Take up to $150 off gas truck exhaust and up to $75 off diesel truck exhaust and components starting July 1st, 2024 – for a limited time only. Evidently, a cat back exhaust system has many benefits all while being a quick, easy, and affordable solution that will transform your car. If you have any questions about what a cat back exhaust system can do for you, don’t hesitate to contact us at Loper’s Performance Center.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

The team at Sandgate Auto Electrics are well-versed in all things automotive which has led to them becoming the go-to for car lovers in the northern suburbs of Brisbane, South East Queensland. As a family owned and run company, who are local residents themselves, we have gotten to know their loyal clientele and love helping them with the repairs and modifications. Each "receiving" 50mm pipe is crushed in half, squeezed next to the other and welded to the 60mm "feed" pipe. We hope you enjoyed this lighter take from 27WON and find the information helpful the next time you shop for an exhaust system.

The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with refined style. Whether it's for work or play, the Roush Super Duty promises to deliver an unparalleled driving experience, making every journey memorable. If the above ten reasons to consider a cat back exhaust system have you thinking it may be right for your car then Sandgate Auto Electrics are the people to call. Your neighbours may disagree that this is a benefit, but as we’ve mentioned earlier, and depending on your muffler choice, your vehicle will have a lot more grunt. This may well be the area you need to do the most research into and the sound quality, and type, can range drastically per system. At Walker, it's more than peace of mind in knowing we lead the industry with unparalleled level of compliance.

Next we have the option we refer to as the Cat-back system (sometimes also known as "with Front Pipe" exhaust). One of the most noticeable changes after installing a cat-back exhaust system is the sound. The exhaust note becomes deeper and more pronounced, giving your vehicle a more aggressive tone. The specific sound varies depending on the muffler and pipe design, allowing drivers to choose a system that matches their preference for loudness and pitch.

Adding Ford F-150 Cat-Back Exhaust system to your truck is a quick, relatively cheap and easy way to extract more performance. We offer a number of high-quality systems from excellent manufacturers, so you can rest assured that whatever choice you make will look and sound like it belongs on your F-150. The Flowmaster Outlaw catback system has dual black tips that exit on the side, adding an extra aggressive look to your vehicle. Or go with a Magnaflow system for a signature rumble that everyone loves. Aftermarket performance exhausts are exhaust systems meant to replace the stock exhaust and offer more power and better tone to your engine. All our products are made from 304L "Aircraft" Grade stainless steel.

There is a range of muffler types you can choose from with a cat back exhaust system with most people opting for a glasspack or straight-through muffler. Both of these options are designed to work well within the system to reduce back pressure. Deciding to purchase a performance exhaust system for your car is no easy task.

When it comes to improving your vehicle’s performance, you have two options. However, stainless still can be very expensive, as opposed to aluminized steel which is very affordable. It is also resistant to corrosion, just not to the level of stainless steel. Since there is no back pressure and the diameter is large enough, the engine will not use a lot of energy to push the exhausts out. While getting a cat-back performance exhaust system can be pricier initially, it can save on a lot of costs in the future. These exhaust pipes are usually wrapped in sound-absorbing materials, mostly fiberglass packing.

The cat back system’s pipes have a larger diameter than a standard set. So, your vehicle will get to perform better at a fraction of the work it outputs. An axle-back exhaust system will replace the components from the rear-axle back. While axle-back CORSA exhausts will provide some slight performance gains, their primary focus is to influence your exhaust notes. Different axle-back exhausts will offer different exhaust notes, so it's best to browse our entire selection to find the sound most suited for your vehicle.

Namely, it replaces the rear axle-back and tips and then a portion of what we refer to as the mid-pipes. This system is emissions friendly and doesn’t require any tuning. In New Jersey, vehicles must pass emissions testing to ensure they meet environmental standards. Since cat-back exhaust systems do not modify the catalytic converter or engine management system, they generally do not affect a vehicle’s ability to pass emissions testing.

At Thermal R&D Performance, we have been developing quality aftermarket exhaust systems for decades. The materials we use are generally an upgrade from OE metals, and we incorporate our True Helmholtz Technology to eliminate cabin drone. This eliminates unwanted sound without restricting airflow needed for improved performance. Some three-way catalytic converter systems have air injection systems with the air injected between the first (NOx reduction) and second (HC and CO oxidation) stages of the converter. As in two-way converters, this injected air provides oxygen for the oxidation reactions.

Engines fitted with regulated 3-way catalytic converters are equipped with a computerized closed-loop feedback fuel injection system using one or more oxygen sensors (also known as Lambda Sonds or sensors). Other variants combined three-way converters with carburetors equipped with feedback mixture control were used. An unregulated three-way converter features the same chemical processes but without the oxygen sensor, which meant higher NOx emissions, particularly under partial loads. These were low-cost solutions, typically used for retrofitting to older cars or for smaller, cheaper cars. Axle-back exhaust systems replace only your vehicle’s rear exhaust section, usually consisting of items behind the rear axles, like rear exhaust pipes, muffler, and exhaust tips. A cat-back exhaust system will replace the components from the catalytic converter back.

Cat-back exhaust systems replace all the components after the catalytic converter, sometimes referred to as the cat. Now you can upgrade your downpipe or mid-pipe depending on your applications. Some cat-back systems will include a mid-pipe depending on your cat layout. And when you want to make more power and take your vehicle to the next level, then you will be ready for an exhaust manifold. Available only from Mallett Performance Cars, this exhaust system is made from 304 stainless steel and features the highest quality mufflers and resonators.

Walker is your one-stop exhaust shop, offering a full line of mufflers, pipes, hardware and accessories. Cat to Y pipe intersection showing after cat O2 sensor location. This qualifies as one of the STRANGEST stock exhaust parts I have seen. For some reason Toyota/Lexus decided to weld a straight section of 60mm pipe to the cat outlet flange, angle cut it, weld a 50mm pipe pipe that has its last couple of inches expanded to 60mm and match angle cut. Also note the O2 placement is in the 50mm sections of the Y pipe where the sensor tip takes up a good portion of the available flow area.

They both improve your engine’s tone and give it that deep rumble loved by every motor enthusiast. Getting a cat-back exhaust system is definitely the more budget-friendly option. Other benefits of aluminized steel is they are lightweight and very workable.

Glasspack mufflers do not have extra sound-absorbing material. So, in order to absorb sound, they use the glass layer and packing. But if you are making your order on partcatalog.com, you can always inquire about the recommended tube diameter for your exhaust system by providing your make and model. This can lead to a significant decrease in torque and horsepower as well as rpm.

As an added bonus, cat-back systems include all of the necessary parts to replace your existing exhaust. The only costs you need to worry about are the 2018 ram 3500 egr delete kit itself and installation. Installing one of our cat-back exhaust systems is one of the best upgrades you can do on your Ford Maverick. Cat-back exhaust refers to what's in "back" of the "cat," or catalytic converter. It refers to the components that run from the rear outlet of the catalytic converter all the way back to the exhaust tip.

Typically, this includes the pipe connecting the pipe from the catalytic converter to the muffler, the muffler, and the tailpipe or exhaust tips. Because these types of exhaust systems are installed after the emissions monitoring systems of a vehicle, they won’t impede its ability to measure emissions. However, you must be aware of your local noise regulations and adhere to them. With relatively short install times when using a high-quality system from MagnaFlow, exhaust modifications can yield the instant gratification of your ride sounding as fast as it looks. When you purchase an aftermarket exhaust system like a cat-back exhaust, you're in control of horsepower and sound output as pipe diameter and muffler type are in your hands.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

They directly bolt on to where the original exhaust sits and do not require any further modification. Cat back exhaust systems come with exhaust pipes, muffler and exhaust tips, so you have everything you need to replace the exhaust. The cat back is the section of the exhaust that runs from the outlet of the catalytic converter to the exhaust tips. Exhaust systems that include this often feature a large pipe running from the converter to the muffler, with mandrel-bent turns and glasspacks for reduced back pressure. Your go-to spot for information on the exhaust system, as well as mufflers, catalytic converters, pipes and sensors.

You get the only the best with SPD's 3" resonator 2017 ram 3500 egr delete kit pipes. These aluminized steel pipes are 3" .. SPD's high performance resonator cat-back pipe replaces your factory resonator pipe with a true 3" p.. The welds and craftsmanship are top notch, and the tips look perfect.

This picture is looking at the manifold end has a 60mm inlet ID and a 3 bolt flange where the outlet end has a 2 bolt flange and a 50mm outlet ID. Increasing your engine’s torque output gives you the power you need to haul heavy payloads and tow trailers, boats, campers, and more. The Carven-TR Series Performance Muffler delivers a deeper sound with a lower tone. Bradley’s Auto Service is proud to be affiliated with TechNet, a network of more than 12,000 locally owned repair shops that are focused on delivering quality care to the communities they serve. When you have any kind of automotive work done by us or another TechNet-affiliated shop, you are covered nationwide.

Unwanted reactions result in the formation of hydrogen sulfide and ammonia, which poison catalysts. Nickel or manganese is sometimes added to the washcoat to limit hydrogen-sulfide emissions.[citation needed] Sulfur-free or low-sulfur fuels eliminate or minimize problems with hydrogen sulfide. It also boasts the ultimate in customization, including the optional 700+ horsepower Shelby GT S/C version.

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it will reduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

To maintain catalyst efficiency, the air–fuel ratio must stay close to stoichiometric and not remain rich or lean for too long. All of Milltek's performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that Milltek's products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. If you are looking for something a little more unique, you can opt for a split rear or custom cat back exhaust system design. The split models feature an exhaust pipe that, as the name suggests, splits into two side-by-side pipes at the end, often with polished muffler and exhaust tips to really make a visual impact. The wider pipes of a cat back exhaust system mean that your vehicle is able to breathe better.